cap site
   
 

BEKO

In the remote terminals 1-5.
To get to the service can be a fresh blank memory. With the memory of the previous entry will not work.


***


***

TV BEKO 12.6 CHASSIS.

PROCESOR
: SDA5535A049.
1.Press PICTURE MENU
2. Push the code "8500"
3.EXIT: Press "850"


***

TV BEKO 12.7 CHASSIS.

PROCESOR:
SDA5535A056.
1. Press PICTURE MENU.
2. Press "9301".
3. EXIT Press "0".

***


***

TV Saish.

Native scheme took on occasion. The microprocessor in the diagram LC863532, but it really says TN-50J2 3QR3.

Under the scheme LA76810 written and in-kind costs LA76810A.
The scheme coincides completely! Therefore, unambiguous videoprotsy!!
Login to the service menu: recall button on the remote and the volume (-) on the TV.
(Recall should not be confused with the display on the unit as Hitachi). Should be lighted at the top Factory.
Then select the Mute button turns the page service.
Set the resolution to SECAM. Now enter the color difference signals are activated. Exit the service menu is the same as the input.


***

TV BEKO 14272TDS model,

processor SDA5535 A071, Enter the service mode: - 1.
Sign in picture menu, 2. Code to dial "9301" 3.For exit press "0"

***

TV Beko t770vdnz100hz.

Bottom of the board za1.190-03 is written. Enter the service mode: the menu button and quickly push 9301, if slowly, it does not come out!

***

TV BEKO FS2101S, shassis E1 - the entrance to the service menu.

Chassis E1. Ingredients: CPU TDA9345ps/N3/3/1913, TDA8357J, CTF5541, TDA16846, AN17827A, JF0501-3254.
Log into the service menu: press series'' MENU'' - and code 9301.
Photo Tag and remote control on the chassis:

 BEKO FS2101S

***

Login to service the TV BEKO 14B3M03.

The chassis is v12.1, changed the picture tube, you need to adjust the geometry, but none of the methods of entry will not do, however, control the non-native, Chinese TH-492, the processor ST6387,


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com