cap site
   
 

HITACHI

button in the left corner of the board .
EXIT: Press the blue button again.

***

HITACHI C2135MN.

entrance into the service menu , turning on the television at the front panel
while holding
This "-" button . The menu contains a large number of anonymous codes
which we decode
so far failed.

***

HITAHCI C25/2844TN, C25/2864TN

(chassis G10). While holding down the VOL + VOL-, press the power
switch. Under the cover of the remote control , press the button twice • «..
OUTPUT : POWER OFF
HITAHCI C2575/76/77, C2975/76/77, CL25/29/76, CP25/29/76,
C28300TN ( A5 chassis ) . Hold down the
button VOL + and VOL-, press the power switch. press
ESC. OUTPUT : POWER
OFF

***

HITACHI C2578FS, C2589FS, CMT2578

CHASSIS V1: The front of the TV, press
button TV \ Video and hold switch on the TV . will
image as shown.
After completing all the settings , press the ENTER button on the remote
Control (learning) then
MENU button or turn off the TV .

***

HITAHCI CL2894/TANATA, CP2894ATANATP/AN

(chassis FEATURE STEREO). Enable
TV with remote control and immediately call the service mode by pressing the button
MENU, TV, i. OUTPUT : POWER
OFF

***

HITAHCI CP2133TA/AN, CL2133TA/TN

(chassis STEREO PLUS). Turn on the TV and immediately with remote control
Login to the service mode by pressing i, M, PROGR. OUTPUT : TV
HITAHCI CP2893TAN, CL2995TAN, CL28500TAN ( chassis A5WK). Hold down the
on the TV
down the VOL + and VOL-, press the power switch. OUTPUT:
POWER OFF
HITAHCI CS2840TA ( chassis EUROSTEREO- 2). Press -/--, MENU,
For the TV 1 . OUTPUT:
POWER OFF
2

***

HITAHCI Fujian FR-14S22, FR-14S40, FR-21S40, FR-21S50,
FR-28S50.


Press the button on the remote
) Button on the front panel of the TV button VOL- and not
releasing it , press
button .
Appears on the screen FACTORY. Repeat pressing a combination of
buttons. Appears on the screen
inscription : B / W BALANCE. Selection of adjustments by the buttons

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com