cap site
   
 

ORION

MITSUBISHI CT-21M5E \ ET \ RT, CT-25M5E \ EN \ ET \ ETN \ RT \ RTN

:
Input: 1. click on the service switch S701 (Close to tuner), then the 9 (within 5 seconds). "*" - Switching adjusting the display, "2" - "8" - control code "6" - "4" - control the data "0" - write to memory, "1", undoing changes to write to memory. Exit: stand by. Button TV / AV - those exits. menu.

TUN 1 (0) - bands UHF, VHF
HTL 1 (0) - disable button "INSTALL"
TXT 0 (1.2) - 1 - Teletext incl. 2 - off
MNP - press "*" - The Settings Menu
AVI 0 (1.2) - inputs AV: 1,2 - have
SYS 0 (1,2,3) - Standard color (should SYS 1 or SYS 2)
STD 0 (1,2,3,4,5) - the standard sound (must STD 3)
Button TV / AV - those exits. menu.


***

MITSUBISI CT-29B3EEST

Log in to the service menu:
Turn on the power. Small screwdriver press the microswitch S701, located next to the antenna. And then the 9 button on the remote for 5 seconds.
Recording - Button 4. The 2 and 0 change code control buttons 5 and 7, change the value data.

***

***

TV ORION. Model NR TV-798,

chassis is unknown. The board BEKO ELEKTRONIK U99.190 inscription. Processor TDA9563H/N1/31 K2J597 Y36919.Y1 FM-10p.
Entering the service menu: contrast with the negative control RC5, (the universal Mak 2000, by dialing 1041), included in the service PAL NO SSTD BG + DK, sound and SECAM Ok!
Remaking 0.22mkF capacitor 8 to ground and replace IF filter.

***

TV ORION SPP2115s,

EPROM - 24C08A, CPU-TDA9381PS/N3/3, CD2537, CD3042, STAFF LA-78040, FBT-BSC24-2422DK.
Entering the service menu: Universal Remote: MAC2000, select the code 1051. Push-MENU. Save-OK.

***


***

ORION195C6PC00ECF011A, memory S24C08AD35, video processor STV2246.

Minus the TV sound, and 6 on the remote (ORION), set 1D = 41 sound, 21 = F8 sekam.

***

ORION NR TV-798

AIWA TV-A215, TV-C142


Login to the service: less contrast from the control RC5, (Mak 2000, code 1041) in the service PAL NO


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com