cap site
   
 

OTHER TELEVISION

31 Horizontal Offset (50Hz) HPOS 06
32 Vertical Size (50Hz) HIT 16
33 Vertical Offset (50Hz) VP50 03
34 Horizontal position (50Hz / 60Hz) - the difference between the HPS 04
35 Swipe vertically (50Hz / 60Hz) - the difference between HITS 02
36 Vertical Offset (60Hz) VP60 00
37 Linearity Vertical VLIN 0C
38 The linearity of the vertical (50 / 60Hz) VLIS FF
39 S correction of the HR VSC O8
42 VHFH-H 00
40 VHFL-L 10
41 VHFL-H 02
44 UHF-L D8
43-L F0 VHFH
47 PNUM 7F
45 UHF-H 00
46 20 SNUM
48 Autotest 02 ZHP
49 adjustment R-Y SRY 08 SECAM,
50 B-Y adjustment SBY 08 SECAM,
51 Adjusting AGC RAGC 21
52 Strengthening the chain-locked loop 00 HAFC
53 Automatic frequency (PIF VCO) AFT 27
54 VOLUME 25% V25 3E
55 to 50% volume V50 4A
56 VOLUME VM2 00
57 Subyarkost (difference) BRTS 04
58 MODE 50
59
60
61 SELF 00 TB 1238N P04OUT SEL
62 Setting the initial value of autoregulation AGC SELF AGC 69
63 Setting the initial value of autoregulation VCO SELF VCO 80
64 Setting the initial value of autoregulation brightness SELFBRTC 75
65 Setting the initial value of autoregulation shade SELFTNTC 00
66 Setting the initial value of autoregulation CNTC SELFCNTC 23
67 Setting the initial value of autoregulation COLC SELF COLC 20
68 00
69 Menu Language 02 LANG
70
71
72 OSD 02 OSD menu Location
OPT 73 04 This parameter can not be adjusted
II. Adjusting AFC
1. Remove the solder from the output "IF".
2.Podayte (38,9MGgts intermediate frequency) signal "band
colored "
3.povorachivayte core transformer T101 before the
Pictures
"Colored strip" on the screen.
4. In the service menu, set the option "SELF VCO".
5.nadavite button on the remote service "AFT OK". *
6.spustya a few seconds, the screen will appear the inscription "AFT OK"
If you have a button on the remote service is not given, set for AFC
ordinary procedure.
III. Adjusting AGC
1.Podat on the RF signal generator with -vhozhdenie (level of 62db,
frequency

  • 69 Channel).

2.Turn digital voltmeter between the foot and the ground tuner AGC.
3. In the service menu option "RAGC" set.
4. Set the value of "3F" and set the current reading


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com