cap site
   
 

OTHER TELEVISION

chips in
remote SAA1250). Out - POWER OFF.

Jinlipu 14 "chassis 3Y01 (Errison.)

in Dzhinlipu

(863328B (52E5)) 3728 - Button
Hidden in
Remote control, and if 863,532 percent, the remote control contacts 2-16 (even if there is
Droplets
the contact pads on the count down beside her).

Chinese Panasonic, SONY, Jinlipu

Other
similar
video M61260 (64)
CPU M37160
1. Select the channel tuning
2. Select the setting precise
3. Activate the setting precise Vol +
4. Use the numeric buttons to select a room service menu
Storing automatically when you exit through "menu"

TVS "KONKA" K2107AST

The entry in the "FACTORY SETTINGS" - button concealed in the left
bottom corner.
Manage the device in "setting Factory" by the book. "0"
switching P-, P +, the volume V-, V +.
Options for TV consisting of the following:

LC863322B (53W3 4F05)

+ LA7642 (Sesam) +
LA76810A
24S08 + + AN (CS) 5265 (two ULF)
To enter the ADJUST MENU - Pressing the key three times hidden
in
remote (right most
lower). Switching sections ADJUST MENU button off
sound
performed MUTE. The rest of the shift and preference
The "+"
"-" Channels, "+", "-"
volume.
Press twice the key hidden in the console (right lowest)

  • On

screen:
B / W BALANCE
S-BRI - 76
with pressure in the provided case, MUTE klavishi-
Horizontal
a thin strip in the middle of the screen to adjust the geometry.
Exit menu - key hidden in remote (right-lowest).

Hold the SERVICE button on the TV,
on the remote control, press the SM. EXIT: TV

Loewe (C9000 chassis) DIGIT2000.

Click
service on the motherboard with processor next (pins 22 and 39) and the button
CM push on the remote control. EXIT: TV.

Loewe ART55 / 84/63/70/96 STUDIO70 / 84 (S9001 chassis) Concept
63/70.

Click the service on the board with processor close
(Or
conclusions of 22 and 39, close the processor) and push the button on the remote CM.
OUTPUT:


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com