cap site
   
 

OTHER TELEVISION

4 49 Gain GDRV green
ST4 23 09 Average value definition
11 COLS 2E average value of the chrominance (SECAM)
SV3 22 09 Average value definition (3,58 NTSC AV)
* VM1 00 30 This parameter can not be adjusted
29 * VM0 2C This parameter can not be adjusted
6 CNTX 3A highest level of contrast
VP50 32 03 Vertical Offset (50Hz)
HPOS 31 06 Horizontal Offset (50Hz)
HPS 34 04 Horizontal Position (50Hz / 60Hz) - the difference
12 SCNT 0E Contrast Adjustment
33 HIT 16 vertical size (50Hz)
36 HITS 02 vertically quantity (50Hz / 60Hz) - the difference
VP60 35 00 (60Hz) Vertical offset
38 VSC O8 S correction of Human Resources
ST3 21 09 (3,58 NTSC TV) Average value definition
37 VLIN 0C vertical linearity
40 VHFL-L 10
39 VLIS FF Vertical Linearity (50 / 60Hz)
24 10 SV4 value definition Central
42-L F0 VHFH
41 VHFL-H 02
44 UHF-L D8
43 VHFH-H 00
46 PNUM 7F
45 UHF-H 00
48 ZHP 02 Autotest
47 20 SNUM
50 SRY 09 SECAM, R-Y adjustment
52 AFT 27 (PIF VCO) Automatic frequency
49 SBY 09 SECAM, B-Y adjustment
51 RAGC 21 AGC Adjustment
54 V25 3D VOLUME 25%
HAFC 53 00 Strengthening the chain-locked loop
56 BRTS 05 (difference) Subyarkost
V50 55 4B 50% volume
58 MODE 50
VOLUME 57 VM2 00
60
59
SELF VCO 80 62 Setting the initial VCO autoregulation
61 SELF 00 TB 1238N P04OUT SEL
SELFBRTC 64 75 Setting the initial brightness of autoregulation
SELF AGC 69 63 Setting the initial autoregulation AGC
SELFTNTC 66 00 Setting the initial shade of autoregulation
SELFCNTC 65 23 Setting the initial autoregulation CNTC
68 00
SELF COLC 20 67 Setting the initial autoregulation COLC
70
LANG 69 02 Menu Language
72 OSD 02 OSD menu Location
71
OPT 73 04 This parameter can not be adjusted
II. Adjusting AFC
1. Remove the legs from the "IF" solder.
2.Podayte signal "color band" (intermediate frequency
38,9MGgts)
3. The core of the transformer T101 twist until the picture "
colored stripes "on the screen.
4. In the service menu option "SELF VCO" set.
5.nadavite button on the remote service "AFT OK". *
6.spustya few seconds the inscription "AFT OK" there.
If the remote service you do not have this button, adjust AFC


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com