cap site
   
 

OTHER TELEVISION

3. In the menu service value "BRTS" to establish such
that
the brightest band was just discernible.

* * *

ROLSEN C2131,

TDA9381PS / N2 / 2I1229
K3J450, CC0247, ROLSEN 1,001,001, TS0324 N2 IM4S

Is there any information on the Service menu Rolsenov built
from
Using this processor? Got a few days ago the party apparatus
this model. Custom menus and panels are similar to the LG, but
option
two buttons "OK" does not fit ...

1. Enter the service menu can be using one of the methods
next.
1.1.1. Using the remote service.
1.1.2. briefly closing 1 and 3 through the contact connector X2
2.2
ohm resistor.
1.1.3. using an ordinary remote control unit,
press
a combination of the following keys:
Service menu C2131
turn down the volume to "0", press the button «menu», select the icon?
"Suitcase", consistently score of "5", "1", "7", press? "Green"
button.
2. List all the adjustments shown in the table №1
3. To exit the menu service is implemented on the remote
Remote
Control button TV / AV. This is realized in the record
EEPROM
all service settings menu.

Table №1
Value Assignment Note
parameter
0-63 VS (32) vertically Linearity
LCP 0-63 (32) of the lower corners of Parabola
SC 0-63 (32) S-correction
VSH 0-63 (32) Vertical offset
HB 0-63 (32) trunnion
VA 0-63 (32) in the vertical dimension
FFI 0,1 (0) filter time constant IF PLL 0 - normal, 1 -
increased
PW 0-63 (32) Parabola UOC c EW
EW 0-63 (32) Horizontal Size
TC 0-63 (32) Keystone
HP 0-63 (32) Horizon. parallelogram
UCP 0-63 (32) of the upper corners of Parabola
HS 0-63 (32) Horizontal offset
VX 0-63 (25) Vertical ZOOM 0 - vertical
CL 0-15 (5) The control voltage on the cathodes (Vbl-wh) 0 - 50 V
HCO 0.1 (1) + 1 Payment dimension horizontal - vertical.
15 - 95 V
BLOG 0-63 (32) The level of "black" on the cathode CRT color channel
green
7 - 75 V
Y 0-15 (7), the delay is the brightness of the image signal
(3,5V
step)
Vg2 <, 0,> Control accelerating voltage Vg2 0 - Vg2 set
<-
increase Vg2
> - To slow Vg2
IFO 0-63 (32) Adjust the IF PLL
EVG 0,1 (1) Lock RGB outputs in the absence of UOC


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com