cap site
   
 

OTHER TELEVISION

then
timing and level of a fixed set of 60%
determined
the amplitude of the sync pulses.
29. Option TSL
With this option, the lower limit of the range is put MB1
at
MHz. From
the value of this channel search begins in this range. By
Default
TSL = 45.
30. TSM Option
This parameter sets limits range MV3 and MB1
at
MHz. It
the value of the technical documentation is taken on the channel selector
used.
By default, TSM = 155.
31. Option TSH
This parameter sets limits UHF and MV3
at
MHz. It
the value of the technical documentation is taken on the channel selector
used.
Default TSH = 451
32. Option TEH
With this option, put the upper limit of the range
DMV in
MHz. Data
value ending search frequency channels in the UHF range.
Default TEH = 863.
33. Option TBL
This parameter is put MB1 selection code range. It
the value of the technical documentation is taken on the channel selector
used.
Default TBL = 01
34. Option TBM
This parameter is placed selection code MV3 range.
The value of the technical documentation is taken on the channel selector
used.
Default TBM = 02.
35. Option TBH
With this option, the choice of code placed UHF.
The value is taken from the technical documentation on the channel selector
used.
Default TBH = 04.
36. Parameter STEP
With this option, put the smallest step size
Selector
channels. Help option from the technical documentation on
selector
channels used. STEP Default is 1 (for the most part
Selectors are used).
62.5 kHz tuning step.
37. Parameter DEL
This parameter is placed relative time, right
to
completion of the process of transition in the channel selector. Meaning
placed
by experience, achieving the highest quality speed search
best (no pass channels, the fewest
channels
false).
38. Parameter RES
With this option, put the initialization EEPROM. To
of this
you need to hold the MENU button on the remote control. After the end of initialization
the unit switches to standby mode. As a result, initialization
Remove all the settings done, and record the values ??of all of
default. In the application of the new EEPROM after connecting TV


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com