cap site
   
 

OTHER TELEVISION

09. 5V SIZE 50 53
14.VCO FINE 51
13. VCO FINE L1 0 5
16. VCO COARSE
15.VCO COARSE L1 0
18.BRIGHT MAX 55
17.BRIGHT CENT 37
20.CONTRAST CENT 30
19.BRIGHT MIN 20
21.CONTRAST MAX 40
23.COLOUR CENT 37
22.CONTRAST MIN 10
24.COLOUR MAX 60
26.TINT 17
25.COLOUR MIN 10
28.M R CUT OFF 75
27. M B CUT OFF 50
30. SHARP 1
29.M G CUT OFF 82
35. H POS OSD 40
31. CVBS OUT 10
36.APR THRESHOLD 15
38.BANDPASS 0
37.BELL FILTER 0
Yield: button network !!
Here's how to switch the color and sound, I do not know.
Maybe someone will tell or firmware casts or any link.

TV HYUNDAI HU-D25A chassis 5N11

, percent
S3P8849XZZ-A089.
entry into service: Press the toggle switch at the same time and VOL + on VOL--
muzzle.
Search "MENU".

ITT 359, 387, 8F HIFI, CB5373Z, 6578F

. CCU
SEL04 / SEL07A processor.
Mode 1: Press contact in the hole near the keyboard with a screwdriver
and
just press the button (S)
Mode 2: Press contact in the hole near the keyboard with a screwdriver
and
just press the button (S) and a second contact on the press. Exit -
(LOAD).

ITT Processors: SAA1293A-03, SAA1293-03.

With no graphics on the remote TV button press Horizon "SERVICE",
displayed
the indicator CH, still paz press - OP appears on the volume
choose the number of registers (1-4) and numbers (1-9) peremenyat bits.
After
push 'Memory'. (You can also close the terminals 15 and 23
chips in
remote SAA1250). Out - POWER OFF.

Jinlipu 14 "chassis 3Y01 (Errison.)

in Dzhinlipu

(863328B (52E5)) 3728 - Button
Hidden in
Remote control, and if 863,532 percent, the remote control contacts 2-16 (even if there is
Droplets
the contact pads on the count down beside her).

Chinese Panasonic, SONY, Jinlipu

Other
similar
video M61260 (64)
CPU M37160
1. Select the channel tuning
2. Select the setting precise
3. Activate the setting precise Vol +
4. Use the numeric buttons to select a room service menu
Storing automatically when you exit through the "menu"

TVS "KONKA" K2107AST


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com