cap site
   
 

OTHER TV

SAA5296 + EPROM

Prosonic CTV 7289DVT 11AK16

All adjustments related to the control mode (white balance,
the geometry of the image, the installation options), made from
using
Remote control or local keyboard buttons. Adjustments are made in
mode
control displayed on the screen in a message OSD. Before
entry into the control mode to properly set
voltage
output power supply, accelerating and focusing electrodes.
1 entry mode.
Press the menu button on the remote control. Use the numeric keypad to enter
alternately
Code numbers 3, 2, 9, 7. Confirmation Log Control mode
will be
display on-screen message.
2. Adjustments.
List of adjustments which can be performed in the mode
Control are shown in Table 1. In columns
lists
adjustable parameters, how it is displayed on the TV screen and
comments
facilitate product adjustments.
Selection of the control parameter is made using the buttons
Cursor
MENU and UP MENU DOWN, or in the case of installation options using
buttons
the numbers 0, 1, 2, 3 on the remote control.

Table

* * *

Avest. 54TTS-09/36/02/39.

simultaneously press VOL- button on the unit and DISPLAY
on the remote control
button. Buttons curb until the letter S on the screen. Transition
on
menu, use the MUTE done. Exit: POWER OFF

* * *

Avest 54TTS-16/88/02/90.

Synchronous press VOL- on the unit and DISPLAY button
on
Remote. Buttons D until the letters on the screen to keep. Rollover
menu
MUTE button is implemented. Exit: POWER OFF

* * *

Avest 65TTS02-PS-02PS 64TTS 88/90, 72TTS-02PS / 86/90
72TTS-02/06/16 ,.


Push synchronization VOL- on the unit and on the remote control DISPLAY
button.
Buttons retain until the letter D on the screen.
Navigating the menu is implemented DISPLAY button. Exit: POWER OFF

* * *

Avest 37 / 54TTS-01.

Login Menu 1: Press the button once VOL-on the unit and
RC
button OSD. Button until the letter S to hold the screen


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com