cap site
   
 

PHILIPS

Menu tuner (TUNER)

In this menu, the following options :
Х IFPLL - phase-locked for PAL / SECAM systems except SECAM LL ';
Х IF_PLL POS - phase-locked SECAM LL ';
Х IF_PLL OFFSET - the default value is 48;
Х AFW - AFC setting ;
Х AGC - AGC setting ;
Х YD - the default value is 12;
Х CL - the default value is 4 ;
Х AFA - parameter is read-only ;
Х AFB - parameter is read-only .
Х

Menu white balance (WHITE TONE)


In this menu, the following options :
Х NORMAL RED - red channel gain ;
Х NORMAL GRE - Gain green channel ;
Х NORMAL BL - Blue channel gain ;
Х DELTA COOL R - the black level in the red channel ;
Х DELTA COOL BL - the black level in the blue channel ;
Х DELTA COOL GRE - the black level in the green channel ;
Х DELTA WARM R - Adjusts the amount of white in the red channel ;
Х DELTA WARM BL - Adjusts the amount of white in the blue channel ;
Х DELTA WARM GRE - Adjusts the amount of white in the green channel .

audio menu

In this menu, the following options :
Х AF-M - the default value is 232;
Х AT - the default value is 4 ;
Х STEREO - The default value is 15 ;
Х DUAL - the default value is 12;
The menu options available in monaural .

raster geometry correction Menu

In this menu, the following options :
Х SBL - a service mark ;
Х VSL - the slope of the vertical ;
Х VAM - vertical dimension ;
Х VSH - vertical shift ;
Х HSH - horizontal shift ;
Х VSC - S- correction in the vertical ,
Х H60 - The default is 10 ;
Х V60 - the default is 12 ;
Х EWC - distortion in the corners ;
Х EWT - trapeze ;
Х EWP - parabola ;
Х EWW - width .
Service User Mode
This regime is a "read only" and is used to determine the status of the TV (for example, to clarify some additional data ) .
TV switches to this mode by pressing and holding the MUTE button on the remote control or any buttons on the control panel ( P +, P -, VOL +, VOL-) for TV
4 s. To exit , press any button except the P + and P - .
When switching to the user mode service adjustments set to "normal" position , some modes are ignored. After exit from adjust mode initial setting modes the TV back to the original values

TAGS:

 
Tags | Site map | Copyrights
Copyright © 2012 service-mode.com