cap site
   
 

PHILIPS

8 CPU error - Histogram - 8 flashes - IC7210 ( standby)
9 Error Processor - 16:9 - 9 blinks - IC7440 ( module 16:9)
10 Module Error WSSB - 10 blinks - IC7540 ( module WSSB)
11 Error Processor - Dolby - 11 flashes - IC7600 ( audio module )

PHILIPS CHASSIS MD2.11/12/13.

The menu is through a special control RC7150.

PHILIPS CHASSIS MD2.22 E. 25PT8303.

Simultaneously press (?) and (SLEEP) under the hood. . Yield : POWER OFF.

PHILIPS CHASSIS MG3.1E. 28PW9525, 28PW8806, 28PT7306/58.

Dial PU combination. Then press (MENU) or (i +). Presented several options codeword .
( 0) + (6 ) + ( 2) + ( 5) + (9 ) + ( 6)
(0 ) + ( 3) + (6 ) + ( 2) + ( 5) + (9 ) + ( 6)
( 0) + (4 ) + (6 ) + ( 2) + ( 5) + (9 ) + ( 6)
(0 ) + ( 7) + (6 ) + ( 2) + ( 5) + (9 ) + ( 6)
(0 ) + ( 8) + (6 ) + ( 2) + ( 5) + (9 ) + ( 6)
(0 ) + ( 3) + (6 ) + ( 5) + (9 ) + ( 6)

PHILIPS CHASSIS 3A. 17CE7630, 21CE7649/55/7590, 17CE7531/7650 247771 , 41CE8746.

Press (MONO) TV on the keyboard . Hold the switch on the TV with the remote control. Yield : STAND-BY

PHILIPS 25PT4104/58.

the first two modes of service SDM shorted to chassis GND checkpoints and SDM second mode SAM. dial on the remote , without pauses , 062,596 [+ ] button on the OSD

PHILIPS 28PT4456/00.

To enter the service mode must be closed contacts and GND SMD servise mode, turn on the TV network and 5 . 15 .. with open contact

PHILIPS 25PT8303

Login to simultaneously press "?" and "sleep" under the hood.

PHILIPS Video two EPSILON.

To enter the service mode by holding the PLAY button (TV) press (STOP) on the remote control

PHILIPS 14PV100/01, 14PV505/58.

Enter the service mode is carried on from standby.
Requires simultaneous pressing (PLAY) on the TV and press (STOP) on the remote control , while keeping about 10 seconds.

PHILIPS 28PT4456/00.

service entrance must be closed contacts : (GND) and (SMD - servise mode) and turn on the TV network after 5-15 seconds and open the contacts .

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com