cap site
   
 

Processor Services

Processor TDA9381PS / N3 / 3 P26NG

- press the button "2" on the remote control. Then press the "P-" six times, the "V" button hold for ten seconds, the service menu will appear. The output is "DISPLAY".

The TDA9384PS / N3 / 3, TDA9384PS / N2 / 3I

processor is the same as the 3P51 chassis.

Processor TMPA8851CPNG-6EG1

, chassis TD173. Enter the service menu: on the front panel of the TV set the volume to 0, holding "VOL-" press "DISPLAY" (rectangle with plus) On the remote control.

Processor TMPA8821CPNG-4UD4

- enter the service menu: 30 program, 88 program, Volume - 0, MUTE.

The TMPA8821CPNG-5EE1 processor

is the same as the M28 chassis.

The TMP47C1637 processor

is the same as the PHILIPS chassis GR2.2AA.

Processor TVP02066 D05 \ 04

is the same as AIWA 1402.

Processor VCT3831A

enter the service menu: press "MENU", then press RECALL five times. Then buttons 1 ... 9 are used to invoke a variety of service menus.
Exit the service by pressing the button 0 or RECALL.

The VCT6743G B3 08 processor

is the same as the JVC.

TV. Processor 8821CPNG4UD4

Entering the service menu:
1. select channel 30
2. dial channel 88
3.To remove the volume to zero.
4. Press mute

TV. Processor 8851CPNG6N59, 8821CPNG5EE1, 8891CSBNG6N54

Entering the service menu:
On the front keyboard to set the volume to 0, holding VOL DOWN, press DISP (rectangle with a plus) on the remote control.

TV. Processor 8873CSCNG, 8873CPANG

Entering the service menu:
On the front panel set the volume to zero, holding VOL DOWN, press the DISP (square with plus) button on the remote control.

TV. Processor 8891CSCNG6V12

Entering the service mode:
1. On the TV set the volume to zero, holding the VOL DOWN button, press DISP (square with plus) on the remote control.
2. Enter the service menu - press the button MENU, CH - on the remote control and dial the code 6483 either 2483 or 6568.


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com