cap site
   
 

Processor Services

TDA9387 32K NTSC
TDA9350 48K PAL / NTSC + 1 PAGE TELETEXT
TDA9351 48K PAL / NTSC / SECAM + 1 PAGE TELETEXT
TDA9360 64K PAL / NTSC + 10 PAGE TELETEXT
TDA9380 32K PAL / NTSC
TDA9361 64K PAL / NTSC / SECAM + 10 PAGE TELETEXT
Set the volume to zero. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV.
To exit the S mode, turn off the TV.

The chassis of the PAXX0081 chassis.

Processor LC863548B
Entering the service mode:
On the TV set the volume to 0, holding VOL DOWN, press DISP (square with a plus) on the remote control.

TV chassis TD173.

Processor TMPA8851CPNG6EG1
Entering the service:
On the front keyboard to set the volume to 0, holding VOL DOWN, press DISP (rectangle with a plus) on the remote control.

Chassis E9 TV

(Processor SDA5255-052 + TDA884x)
Entering the service: connect the TV, go into working mode from the attendant, and for 5 seconds alternately press "TV", then "i", then "STOP".
Input from the Mak Maki 2002 console
Code = 1273.
Press "TV" = Rec / Erase
Press "i" = << / RADIO
Press "STOP" => / LNB
All buttons are in the bottom two rows, both for a VCR and for teletext.
Press Shift + MODE = Picture Menu
Press Shift + H / V = ??Sound Menu

TV chassis TV2K.

Processor ST92T195
Press the hidden button on the remote control (located under the cursor button "triangle down" in the row of buttons from the bottom - average, to finish the remote control, you need to remove this window and put this button). Translation by the menu items P +, P-, change of parameters by buttons VOL + VOL-. To exit the sub-menu, press the OK button. Exit the service menu - STANDBY.
Through the universal MAK-panel For normal TV control, dial -1263.

  • To enter the service, use the code 1360, and then click, MENU, then RED key, (menu, then the red button)

Mitsai TV.

Processor TDA9380PS / N1 / 1K0174. Model Mitsai Basic TV-37 cm
Unlock the lock.
Find "Lock" in the "Features" menu


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com