cap site
   
 

Processor Services

Entering the service mode: put the "VOL-" button on the remote control by 0, then in the main menu (or PICTURE MENU) dial 8600 or 8633 or 6483 (we'll call it XXXX), which is equivalent to pressing the FACTORY button.
The service menu contains three sub-sections: FACTORY, B / W BALANCE, ADJUST. Transfer between them after pressing the Factory button, or by entering the code XXXX.
In the service mode it is advised to put ENG.OPTION = 1, SETUP SELECT = 1.
Exit this mode is possible by two methods:
1. After pressing the MENU button, enter the code XXXX, turn to the "PRODUCT" menu, then the second operation (after pressing "MENU", enter the code XXXX) to return to the normal state.
2. put the option in MENU 03 "PROD MODE" = 0, and then press the "MENU" button to exit the service mode.
To remove the lock:
The first option is to press and hold the "DISP" button on the remote control for ten seconds.
The second option - on the remote control press "CALL" and hold for about a minute.


* * *

processor LA76936Y 7N 58Y7

Entering the service menu:
In the main menu, enter the code: 6483, which is equivalent to pressing the FACTORY button.
The service includes three subsections: FACTORY, B / W BALANCE, ADJUST.
Transfer between them by pressing the Factory button, or by entering the code 6483.

processor LA76938N 7N 58R2

Entering the service: using the remote control buttons to put VOL to zero, MENU, enter the code 6568.

processor LC863332B 52Z6 3KD0

Entering into the service:
In the main menu, press the code: 6483, which is equivalent to pressing the FACTORY button.
The service menu includes 3 subsections: FACTORY, B / W BALANCE, ADJUST.
Transfer between them by pressing the Factory button, or by entering the code 6483.

processor LC863528A-xxxx

Entering the service: press REWIEW, then VOL DOWN and synchronously REWIEW.
To exit, play the procedure.

processor LC863532B, LC863332B 52Z6 3MD7, LC863332B-53L1


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com