cap site
   
 

Service Chassis

Exit - click twice Standby on the remote control.

Q
Chassis Q2000, Q2500 - see. LOEWE

Sxx-cm chassis.
POLAR, RUBIN

Chassis SM1 percent. ST6385BB1
Removing PASS:
Soldered to the chip in the original remote ms GMS 30150 (SMD) button on the 4 and 17 pin. Press two or more times, then appears on the screen OSD: PASS CLEAR.
You can also use the remote control on the M 3004LAB1 (SAA 3004P), but the key to solder 2 and 18 pin.
On chips K51900-43 and OHS2015DN - on 18 pin chip and an anode of diode D6.

SOME chassis
To access the menu, press a keypad the following combination (0) (6) (2) (5) (9) (6) channels will change. Then press (MENU).
To save your changes, press POWER on the TV.

Chassis STEREO PLUS SABA, ITT, SELECO, TELEFUNKEN
Press quickly (i) (M) (P) or
(MUTE) (OK) (TV) Record results - (OK) Output (TV)

Chassis STEREO PLUS2 percent. SDA30C263M2
When the TV mode Stby - Press VOL-- on the local keyboard and simultaneously begin to enter the code: MENU and TV. (Release the VOL - after the MENU button is pressed and turn on the TV by pressing the TV). Activate the service menu by pressing the "i" button remote control.
In normal mode: Press VOL-- on the local keyboard and simultaneously begin to enter the code: MENU and TV. (Release the VOL - after the button has been pressed MENU). Activate the service menu by pressing the "i" button remote control. You can switch SERVICE / TV
T
Chassis T08-29K percent. 8891CPBNG6KU3
Set the volume to 0, simultaneously press on the local keyboard and VOL- DISP (a rectangle with a +) on the remote. Advanced service - see F7 Page 1 put.
Switching pages - press the Mute button on the remote control. Exit - Menu.

Chassis TD173 percent. TMPA8851CPNG6EG1
on the local keyboard to set the volume to 0 while holding VOL-, press DISP (a rectangle with a plus) on the remote control.

Chassis TD-18 (PAEX0088) Processor Control: TMP87CK38N video processor: TB1238N
(a list of service codes)
There are three service modes: S, D, M.
S-mode - service;
D-mode - extended service;
M-mode - + accelerated training.


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com