cap site
   
 

Service Chassis


* * *

Chassis
Entrance to the service menu for the chassis used by various brands.
1.
chassis 10.3, 10.4, 12.1, 12.4, 12.6, 12.7, 12.8, 14.1, 14.2, 16.1, 20.2, 22.1, 22.2 - cm. BEKO
Chassis 11AKxx see. VESTEL
Chassis 17MB22-2 percent. VCT6973G.
Entrance to the service: enter the setup menu (SET) and dial 4725, the output - Standby.

2.
Chassis 29M03 percent. M37160M8-064FP
In the main menu, enter the code 6, 4, 8, 3. The Service contains submenus, switching to the next of which is carried out by entering 6, 4, 8, 3.

3.
Chassis 3P51 TDA9381PS / N3 / 3/2009
There are two service modes:
1. Press S.M., DISPLAY, and I / II.
2. Press the Clock, P.M. button and timer.
Out - DISPLAY.

Chassis Chassis 3P52 3P61 percent. TDA9384PS / N3 / 3
To enter the service menu press the MENU - PP - SS and SLEEP on the remote control.
Out - DISPLAY.

3S10 chassis percent: ST92185BN4B1 / PBI 3S10B-ENG / RUSS videoprots .: STV2248C
Menu - AV - ANAL OK - Output selection - PP (in some network-button or STANDBY)

Chassis 3Y01 percent. LC8633XX
(1) Press the MENU key twin, until the PICTURE MENU appears, then press the Q.VIEW. MUTE key to turn on CPU. TV will enter the factory mode. Press TIMER to activate the submenu.
(2) Press MENU to exit the factory mode.

For televisions with an English menu, press on the remote control:
(MENU) -> (MENU) -> (Q.vew) -> (Mute) For TV with Russian menu is not appropriate.
Exit (MENU)

Chassis 3Y01 percent. LC863332B To enter MENU - triple pressing a hidden button in the console (the lower right).
Switching sections performed MENU button mute MUTE. Other switching and selection (+), (-) channels, (+) (-) volume. Accessed by pressing the keys hidden in the console (the bottom right) - on the screen:
B / W BALANCE S-BRI - 76
when you press the keys in this case, MUTE - thin horizontal stripe in the middle of the screen to adjust the geometry.
Exiting the menu - a hidden button in the console (the lower right).

Chassis 3Y01 percent. 863328B (52E5)
Hidden button on the remote control, and if
prots.863532, then 2-16 contacts in the remote control (even if DROP is then read by the pads around it).


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com