cap site
   
 

CHINA


***

LC863328A - 5W63

One version of the entrance to the service of the TV - the volume to 0 on the panel and on the remote control RECALL. The second - the hidden button on the remote.


***

LC863332A-5Z51

LC863332A-5Z51 - ERC 21SP50 (CE2181) (analogue FUNAI S2100PF, S2500PF) - remote: RSU21SP50.
Log into the service menu using the remote control, press (RECALL (DYSPLAY)), then press (V-) and hold it for a while. The screen will be 'FACTORY'.
Repeating this process several times will print to the screen 'C / B ADJUST' 'ADJUST' 'SETUP' and return to 'NORMAL TV'.
Removing the lock - on the remote press and hold the CALL for almost a minute.

Login to s / m 2-16 pin CD7461CO (hidden button). Each time you press me around: FACTORY - B / W BALANCE - ADJUST MENU 0 - TV. Switching ADJUST MENU (0 - 9) closing 3 - 15 pin.

***

Log into the service menu and the remote to the TV model BORK SNR2122.

Ingredients: Microprocessor NTDA9381C32NE.
NTDA9381-2NC - Rekord'om used. NTDA9381-7NA same thing NTDA9381-2NA - Falcon, A-2042 chassis, and if I'm not mistaken, the chassis S-2042, S2043. There are analogues and more. TV schedule at Falcon on graphics processor like: (CH05T0102) TDA9381PS/N2/2/1091.
In the service break in two ways. First - Press MENU and the code 8500, the other - jumper legs 11 and 25 encoder SAA3010 (RC-5). Tuner with a range of dvuhvyvodnoy analog bus to the management of 10 and 11 legs of the processor. The output voltage adjustment - 4.
If your processor is described in the service responds that microprocessors NTDA9381-2NC and NTDA9381-7NA same as NTDA9381-2NA - interchangeable - most likely.
The first way - then dial MENU 8500 - all of it! Sokolovsky with help of remote and the buttons on the front of TV: In the "MENU" hit and 8500 on the remote, and there was an "M" red on the screen.
Then the numeric keypad on the "1-9" sub-menu is selected, for example, the number "8" is selected geometry menu, and use the program selection and volume change, and the lines are selected menus and settings, so save the settings by pressing the off button on the remote and all ok! Remote Falcon RC-FX36A, and is suitable SOKOL RC-FX41 with t / t


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com