cap site
   
 

DAEWOO


***

TV Elenberg 1403,

processor LA76936N7N57T5E.
Enter the service mode: push button MENU, then press the RECALL three times. Then the buttons P + P-movement and Vol + Vol-changing parameters.
Exit the service menu, use the RECALL.

***

Login television service Elenberg 21sl5

Ingredients: CPU tda9341ps, personnel la78040, sound an7522 necessary input to the service Elenberg 21sl5, size corrected, by means of stereotypes comes out:
menu +5 times Q, viev and menus, code 8500. The name of the remote start np41, microprocessor tda9341ps on paper ntda9341 - 2ndg.
All that happened came - menu and code 6483


***

TV Elenberg 29F08 entry into the service mode.
Ingredients: CPU TDA12062H1/N1F00, memory 24C16
It turns out, you need to press Menu, and five times Q.VIEW button on the remote, sometimes need to quickly press, sometimes calm.

***

TV elenberg 21f08, go to the service.

Ingredients: Microprocessor: TDA12060H1/N1F00SC7671.1. Apparatus 2 years. Replaced strochnik (original not found - set like a machine aiwa). Need to adjust the geometry.
Log into the service menu to press menu, and five times to press Q.VIEW.

***

TV Elenberg CTV1560

- the entrance to the service menu.
Appeared in the repair of the lack of sound - sizzles on all programs as if connected BG. In the menu there is no option about the sound, you need to get into the service. Ingredients: microprocessor - MICRONAS VCT3831A C4, memory - 24S16, IF - TDA9881TS, HR chip - STV9302A, food - STRW6753.
The problem was solved very simply: the television first dragged without control, the button brings up a menu on the face, however, there are no options for sound. Yesterday dragged control, there is key "sound" - then everything is clear. But the entrance to the service menu on this chassis has remained unknown.
Log into the service menu button on the remote control hidden at the bottom - left. She's OK

***


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com