cap site
   
 

DAEWOO

Instead R09 3 k put (series R08, R09). Between the buttons SW3, SW5 set 3.9k ohms (R06). Between the buttons SW4 and SW1 - solder 15 ohm resistance (R03). Instead of solder R04 13.8 ohm resistance (R05 + R04).

***

TV ERISSON 1430. ETA-1 chassis.


PROCEED 8891CSBNG6KF8, memory 24S16, HOT D5023, footage LA78040N,
BP STRG5653, TDKS BSC59T 2 (B), TUNER TAF5-C4I23, SOUND TFA9842AJ,
REMOTE 21SF30.
Entering the service menu: The volume is set to "0" to press "MUTE" on the remote control and pull it out to put pressure on TV "MENU".
OUTPUT: disabled in the guardroom.
For information - these panels are suitable:
K16R-C2 (C3, C10, C17); K10R-C3R (C17); K18F-C4

***

TV ERISSON 29SF10.

Processor - LA76938N
SUSOC 7N 58R2 JA06,
TUNER - EWT-5F3T1-E06W, MEMORY - 24C08, QUARTZ - 4.433619 MHz
UPS - QQ1265RT,
ULF - LA42352, HOT - C5148, trans adapter - BCK-40-LF01X-3, 32.768 MHz,
PERSONNEL CHIP - LA78141, FBT - BSC29-M2477 5131-051409-31
Entering the service menu: On the front panel of the TV
VOLUME MINUS set to "0". Then dial MENU, and code 6568 ...

***

TV ERISSON model 21F5

chassis 3Y18,
LA76936Y 7N 58M2;
HR LA78040B; 24C08WP; BSC23-N0164; ULF LA42351; FBT Tuner
EWT-5F3M43-EW;
SMPS FCQ0765RT.
Entering the service menu with the remote control staff: quickly press the Menu -
QView - Mute,
Finally VOL - any.

***

TV ERISSON 21UF24, 3P66 chassis.

Memory 24C08WP, Processor TDA11136PS/N3/3/AH8 CR7967 CR7457 TOP-E-090115-EW TSG610022B1B
1 NXP B.V. 2006 Kadr.LA78141, Tuner EWT-5F3T1-E06W, HOT.
2SD5023,
PSU. STRW6554A, sound chip TEA2025B, FBT. BSC25-N1574.
He came with the diagnosis - the mains voltage exaggerated. STRW6554A defective (scattered) on STRW6556A replaced, infa-(STRW6754 = STRW6753 = (STRW6750F) = STRW6756 = (STRW6765) STRW6554A = STRW6553A = STRW6556A - different capacity).
B + operating mode / ST.BY = 115v / 55v
Entering the service menu - in the mode of operation of the remote control to press:


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com