cap site
   
 

DAEWOO


***

Service DAEWOO


***

Daewoo 25G1T

Processor - 87CP38N-3573
Video processor - TB1226BN
Power supply - STR S 6708
Tuner - EC931X4
TDKS - 1352.5010
chip Teletext - SAA5281P / R
Remote Control - R-22
Chassis - CM-900
Login to the service:
1.Press the button MUTE (briefly)
2.Nazhat and hold MUTE
3.Using pressed MUTE, press the MENU
4.Vyhod button Power of

***

DAEWOO CM-003

1. Service Mode ADJUSTMENTS
Follow these steps when you need a service adjustment.
1) How to enter the service mode using the user remote control.
Х Turn on the Set.
Х Direct the remote control to the reception window of TV.
Х Press the remote control in sequence as follows.
1 - MUTE - DISPLAY - MUTE

***

DAEWOO CM-012M

1. Service Mode ADJUSTMENTS
Follow these steps when you need a service adjustment.
1) How to enter the service mode using the user remote control.
Х Turn on the Set.
Х Direct the remote control to the reception window of TV.
Х Press the remote control in sequence as follows.
1 - MUTE - DISPLAY - MUTE

***

DAEWOO CM-650

To switch on the TV in service mode, see instructions
below.
1 - Select PR. Number 91
2 - Adjust sharpness to minimum and exit all menus.
3 - for 2 seconds, press the key combination: red - green - menu
Version is displayed next to the word service, for example, "SERVICE V1.00".
To exit the menu, click Tools menu key or stand on the key.


***

DAEWOO CM-870, CN-011, CP-002

1) Select the channel number on the TV 91
2) Set the minimum SHARPNESS
3) Quickly press the remote (RED) - (GREEN) - (MENU)
CN-011: Press the button on the remote (MUTE) (DISPLAY) (MUTE). Control (VOL UP) (VOL DOUN) (PR +) (PR-). Every change made in the sub need to remember, pressing the (DISPLAY).


***

CP-002

Enter the service mode DAEWOO TV with a custom control model DTC-14 V1/V3/V4/V5/U1 TM
DTC-20 V1/V3/V4/V5/U1 TM
DTC-21 V1/V3/V4/U1/U3 TM
Processor control ST92195, Eeprom AT24c16, video processor, radio STV2238


 
Tags | Site map | Copyrights
Copyright © 2012 service-mode.com