cap site
   
 

FUNAI

connected , press the button on the remote stb, dial the code 2,7,1 and mute hold more than 5 seconds.

***

TV LCD FUNAI LCD-C2007.

Television brought from Germany, and there is no sound standards , please tell us how to be in the service, to connect the sound.

CPU : RENESAS (cmd) R8A66605A92FP
Processor : FUNAI (cmd) LC4PAL 1ST A74 710AZA2
Memory : 24C64 (cmd)
stereo MSP3417G (cmd)
Push the button ( standby) , 271, and (MUTE) button on the remote in the correct order for five seconds. To exit the service to press the STANDBY button on the remote .
Sound is connected , and the Russian language .


***

TV Funai tv-2100a mk12

, does not leave the service menu.
Soldered into the remote bridge , climbed into service , version 061-0.08 , turned off the TV. When you connect the TV remains in the service menu.
As disabled . In memory , it is necessary to turn off the handset, the POW.

***

TV Fusion FLTV-19W6 LCD.

Enter the service mode : menu button and code 7050 .


***


TV GABA CL2121


Chinese on the TDA9361- like frame drop ?
Ingredients: CPU TDA9361PS/N3/5, personnel LA78040A
Firmware flew .
After initialization, the frame must be lowered by a few centimeters.
Having tried a variety of options in the service menu does not make it part of a rare Chinese beast ...
On the proce two more lines:
CF6843
54607130
And a piece of paper on it :
9361-1911
080304

Inscription on the board still has : YH2166C
Try MENU, then the code of 6483 .
Lights red M in the top left corner. Log in and flipped a service menu - the green button.
In "menu eighth " correction on the frame .

***

TV GALACTIC 21G180,

mikroprotsessorTDA9381PS
TDA9351/N3/3/1977 CH6620 CH7771, VLF AN17823A, personnel TDA78040, TDKS BSC24-01N4014, PAL / SECAM. B / G D / K.
Entering the service menu : - Press Menu , then select code 6483 .

***

TV GENERAL 21FS32S entrance into the service menu .


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com