cap site
   
 

HORIZONT

unsuitable after having been committed by other geometrical
adjustment.
5.2.2 Vertical Size
Press ? , ? , That the horizontal black lines on
the lower and upper parts
the test pattern is very close to the top and
bottom sides of the tube . Check and
reconfigure the control V-SIZE, if an adjustment was
unsuitable after the other committed
geometrical adjustment.
5.2.3 Horizontal Shift
Adjust the H-SHIFT with the buttons ? , ? , To test
The tables are placed on
equidistant from the right and left sides of the kinescope .
Check and reconfigure the control H-SHIFT,
if an adjustment was inappropriate after the committed
other geometrical adjustment.
5.2.4 Horizontal Size
Adjust the H-SIZE by pressing the ? , ? , So as not to be visible white
rectangles on the left and
the right side of the test pattern or image was not
wide . Check and re-adjust
adjustment of H-SIZE, if an adjustment was inappropriate after
how committed other geometric
adjustment.

32
5.2.5 Inversion
Press ? , ? , The size of the squares on the top and bottom
parts of the test pattern
become equal size squares lying at the vertical center
the test pattern . Check and
reconfigure the control S-COR, if an adjustment was
unsuitable after the other committed
geometrical adjustment.
5.2.6 Linearity
Press ? , ? , The size of the squares of the test
Table become equal to the entire screen .
Check and reconfigure the control LINRT, if adjustment
become unsuitable after
committed other geometric adjustments.
5.2.7 Rotation angle view
Press ? , ? , To test pattern was
completely perpendicular
horizontal lines without vertical displacement angle . Check
and reset adjustment ANGLE,
if an adjustment was inappropriate after the committed
other geometrical adjustment.
5.2.8 Bending
Press ? , ? To vertical lines , especially those
that are close to the left and
right sides , will flatten and become symmetric
bandage , ie together they will not be sent to any
to the left or to the right side. Check and re-adjust
adjustment BOW, if an adjustment was
unsuitable after committed other geometric


 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com