cap site
   
 

JVC

Processor TDA9381PS/N3/1/1513.
Russian is the language , there is an opportunity to include when DK.
Entering the service menu: turn the program and at the same time 75
Funktion keep it pressed on the front panel and on Display
remote ,
until the display shows S, and then again Display. In the menu
service option to select SYS SYS XX and 03 set , the introduction of
memory MENU button on the remote .

***

Log into the service menu for KARAT L2121.

Processor KSS88P8324N, video processor CTV2112B, chassis , it seems , TV95, Remote RC514A. Plohovato kinescope balance must be readjusted .
The board sought inscription TV95. And TV84 entering the service?
Push HOLD, then MIX, then BLUE.
Entered .

***

TV Karcher CTV6421

chassis PT92,
Processor : TDA9350PS/N1/2S0510. SECAM - there , Sound BG - there , PAL

  • There , Sound DK - there .

Entering the service menu : "SUB-PAGE" ( on remote native
below the second row , second right ) on the remote control and the volume "Volume -"
on the TV. The service - push (5 ) and set
option SECAM-DK and PAL-DK.

***


***

TV Karcher CTV5514 VT SILBER PAL BG.

Microprocessor ST92195B5B1/PBY. 24C08 Memory.
Ideal for MAK2007 code 1263 . This remote IR556.
In this code, the entrance to the service mode button "OK". submenu
choose - red snapper out of the service - the green button .
Such options are :
Option5- 00
Option4- 15
Option3- 06
Option2- 00
Option1- 48.
Under these options, BG / DK PAL / SECAM.


***

TV KENDO, UNIVERSUM, ORION: CT71S92 / N, CT63S92 / N,
FT5916, BS990shassi processor : TVPOSM90.02 (90.03).


All adjustments are connected to the control mode are realized
using the remote control BS847.1, chip-based
SAA1250 -1
and the local keypad . Need adjustment appears
in the case of changing the channel parts in the case of sound or change
non-volatile memory (NVM3060) IC1.
Log into the service menu :
1) Turn on the TV with the remote control in the STANDBY mode .

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com