cap site
   
 

LG

title = "LIFETEC">


***

TV Liberton LIC-21S03G. Finds the entrance to the service.

Ingredients: protsessorTDA11136 , vertical sweep LA78040, memory 24C16. Liberton LIC-21S03G. not adjusted . Net installed EEPROM - all functioned well , but the geometry must be corrected .
In the service can not climb ...
TV LIBERTON LIC21S03G - TDA11136PS/N2/3

Single-chip device :
NXP TDA11136PS/N2/3 CK3865 CK6702 fourth line is not available.

ZQ - H24, 576M, memory - FM24C16 - « native" memory flew with failure to record and change the memory 24C16 ATMEL.
Line - BU2720DX
IC vertical sweep - TDA4864AJ
Tuner - TAF5-C4I23 (RoHS)
PWM power supply module - FSCQ0765RT - without elaboration changed to KA5Q0765RT
sound - TFA9842AJ
Kinescope - A51CPAB00X01 (IRICO)
TDKS - ROHS BSC60E1 (B) 234175 - 080604C
transformer TPI - BCK- 35 - 0489 RoHS - 810 030 175

Log into the service menu.
1. Reduce the volume to "0".
2 . Hold the MUTE button remote control - to press the MENU button on the " lokalke " TV.
3 . Output - pressure on the remote control POWER.

***

TV Loewe Arcada 8772 , 8672 , etc. Q2300 chassis
2400 .


Entering service : put pressure on the unit (not on the remote and
on the TV itself ), four times the arrow button " on the arrow
hour " , the inscription appears Service, and then continued 1
sec. on the remote key M.


***

service entrance TV LOEWE ACONDA 9381ZW, chassis G2500 \ H.

Required to correct the geometry . And to get into the service menu can not. Tell those in the know . Search until nothing provided . Only trash everywhere .
As it turned out , the trick in detail. In the menu on the TV to choose the service menu and continued more than 0.5 seconds to press the M button on the remote If time-based , shall not go like this. Podregulival geometry , everything is fine.

***

TV Loewe Profil 3572z. Not included in the service menu.

Four fast clicking book. Menu on the phone . , Then too quickly - Menu on the remote .

TAGS:, ,

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com