cap site
   
 

LG

Go into the service menu and did not work, but the native firmware corrected . Insert a blank memory, earned candy , pulled , pushed into the programmer , wrote the last three lines with bad firmware , recorded earned firmware , all good now , geometry tolerable.

***


***

TV Mitsai TV Techno 51CM,

PT- 92 -90 chassis, microprocessor TDA 9350 PS/N1/2S0512
TELRA_T3_D.
Enter the service menu: press on the remote control and SubPage Vol-volume on the TV. Present and DK and Secam.

***

TV Mitsai processor TDA9380PS/N1/1K0174.

from jake9999soobschenie, Mitsai Basic model TV- 37 cm

  • DESBLOQUEAR CUDIGO ...

Premir January 2 e depois no telecomando
Seleccionar "Lock" no menu (Features) "Caracteristicas"
Premir tecla 3 no telecomando
Premir e premida manter a tecla "Vol-" no painel frontal
(Para ir a Features manter premida aty alterar Premir tecla
"Menu" eo menu (Overview) Bloqueio passa a" off "
Premir 2X tecla "Menu"
(translation): Unlock code.
Elect Lock in Features menu. to press 1 , then 2 on the remote. Push and hold the Vol- on the muzzle. 3 Push the button on the remote. Locking in the "off" switches.
Features for transfer to push "Menu" and hold until the change. Push twice "Menu". This language is Portuguese.

***

TV MITSUBISHI CT-21M5RT entry into service mode.

Ingredients: microprocessor 9291N7B1ECT \ A30, tuner UV1315 \ 1 , then video XC44031AB.
How to enter the service menu, after flashing memory is needed to correct the geometry

***

TV MITSUBISHI CT-25M5E \ EN \ ET \ ETN, CT-21M5E \ ET \ RT, \ RT \ RTN:

Login to lean on the service switch S701 (tuner series), then the 9 button (within five seconds).
"*" - Switching the display adjustment, " 6" - " 4 " - adjustment data " 2 " - " 8 " - Adjusts the code " 0 " - write to memory, " 1 " cancel modifications to write into memory. Exit: stand by. Button TV / AV - Exit from the menu techno.
HTL 1 (0 ) - disable button "INSTALL"

TAGS:, ,

 
Tags | Site map | Copyrights
Copyright © 2012 service-mode.com