cap site
   
 

LG

TUN 1 (0 ) - bands UHF, VHF,
TXT 0 (1,2) - 1 - Teletext incl. 2 - disabled
MNP - to press "*" - enter Setup,
AVI 0 (1,2) - Inputs AV: 1, 2 - have both inputs.
SYS 0 (1,2,3) - standard color (must SYS 1 or SYS 2).
STD 0 (1,2,3,4,5) - sound standard (STD need 3).
Button TV / AV - Exit from the menu techno.

***

TV MITSUBISI CT-29B3EEST.

Log into the service menu: Connect. Use a small screwdriver to push the micro switch S701, located near the aerial socket. And then on the remote 9 button during 5 seconds. Write - button 4 . 2 0 buttons and code adjustment buttons change, 5 and 7 data value change.

***

TV MITSUBISHI

Model: CT-29B2EEST,
CT-29B3EEST, CT-25M5E, CT-21M5E/ET/RT, CT-25M5G.
Microprocessors: ST9291N6B1NO/B10, CXP80424, ST9291N6B1ECS/B20.
Chassis: EE- 3 , EURO- 11 , EE- 4 .
Log into the service menu: Connect the power supply. Use a small screwdriver to press on mikrika S701, near the aerial socket located, and then - on the " 9 " remote control for 5 seconds. Exit the service - (CM) POWER OFF


***

TV MIVAR 14P2.

Log into the service menu on the local keyboard simultaneously press the F and P-, mode appears S2na screen. Sort through the options: ORA - back on the remote button AV-forward. Modification of the parameters: the button STOP -
reduce RIV-button to increase. Remember - on the local keyboard MEM. Get out of the service - "OFF" button. V and F - geometry parameter modification buttons on the remote, for example, program numbers. F and P + - restore factory settings.
Alteration of sound - set SFE 6.5 plus appropriate IF filter.

***


***

TV mondial casa STV3682,

CTS AB chassis, remote RC2143, processor SAA5531PS/M4/0657.
Login to the service menu: Perc RESISTOR IS NEAR WITH SERVICE
Inscriptions.
ITS unsolder and push BUTTON I +
OP22- 08
OP21 -03
Memorable-INST
WILL LIKELY IF filter with
BACK - sealed and SECAM DK AND IS.

***

TV MONEL MT2196F

, input service menu?

TAGS:, ,

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com