cap site
   
 

SONY

Everything has happened, the thing is that the menu button should be held not less than ten seconds.

* * *

TV TECHNOSONIC LCD2018,

Entrance to the service menu.
Ingredients: CPU + Scaler - DPS9450A, LVDS - DS90C385MTD, video processor
- VPC3230D,
More of the TV include: sound - MSP3410G, ROM + Teletext - ST92T19SD7B1, LF amplifier -TDA7057AQ, radio -TDA9886T.
The issue is that I can not fall into the settings on the TV program. MENU button everything is removed (functions, image settings, languages, etc.) in addition to the settings in the program, it may be worth the protection of children. In this connection the question - how to go to the service menu.
In the service menu came, but not from the main menu and sub-menu - "FEATURES", and then the code 1923. Was the hotel mode.

* * *

TV TELEFUNKEN, chassis ICC6

, mode HOTEL
TELEFUNKEN SHASIS ICC6. HOTEL
Here is a note on the service fails.
1.otklyuchit TV
2.nadavit simultaneously VO L +, VOL-and include TV.
3.priderzhat these buttons until the connect service.
4.pomenyat 7 bits to 0.1.
Switch off in the guardroom, then click Network, and then plug, pressing on the remote off mode.


* * *

Plasma TV Tevion MD31842.

Tell code enter the service menu.
Ingredients: processor SDA6000B12. DPS9455B. VSP9417B. audio processor MSP4411K. AD9880. DRX3961A.
TV functions, only the 16: 9 image Move to the right and a small inversion sleva.V 4: 3 format very well. Entrance to the service menu code of four digits. Tried in 1675; 9301; 4725; 8500; 1923 - none of them good.

Tevion MD31842
Code enter the service menu -1121.

* * *


* * *

TV TEVION MD7085 VTS A / a

. TV9 chassis. What is the entrance to the service menu.
Ingredients: processor ST92R195 BO / EPF, memory 24WC32J, personnel TDA8177F, sound TDA7485, tuner 6002PH5.
Can not log into the service menu method: Vol- and P- on the face of the unit and turn on the power button. Push and release the MUTE button on the remote control on OK, on TB ... Remote Vr6. In chassis TV17 went without question. In the service menu, go to setup geometry, pillow and vertical symmetry.

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com