cap site
   
 

SONY

which gradually decreases towards the center of the screen.
The reason: the passage of low-frequency components of the incomplete
video
due to the lack of resistor R345 (when illumination with video input
image)
or R323 (flare when taken with the tuner of the image).
Solution: put a resistor missing - METAL GLASE 47K 5%
0.1W (1-216-089-00)
Symptom: when viewing dark images scenes with video input
or through
Tuner in the upper part of the screen in the form of visible illumination spots
light.
Cause: The reflection of the pulse measurement circuit balance
automatic
white on the inner surface of the tube.
Solution: to reach the reflection more uniform by small
and changes. After the adjustment, check the absence of
reflection
When signal SECAM system black field through the antenna and
LF inputs, as well as the absence of a signal.

* * *

SONY CHASSIS AE-2F KV-S2942U, KV-S2941A \ B \ D \ K, KV-S2943E
RM-831

:
connect the power of the TV, and then double-click the control to
ON button.
In the upper right corner of the inscription appears TT, then push the
press MENU.
Sony 3


* * *

SONY CHASSIS AE-3 KV-S2951 KR

. use the remote
type RM-831.
Connect the power of the machine, crushing synchronously - and + buttons on
front panel of the TV.

* * *

SONY KR-S4613 CHASSIS AP-2

: Use the console type
RM-832.
Connect the power of the TV at the same time, any 2 buttons
pressing
front panel of the TV.

* * *

CHASSIS BE-3B

.In early 1999 in all centers
service
Russia got the information from the main office of the firm on disclosure
defect
models KV-M2541K and KV-M2540K and its methods of removal. beginning
with rooms
Factory 4046344 (KV-M2540K) and 4,000,310 (KV-M2541K), in
design
apparatuses amended, of any below to tell.
A defect is detected in the absence of the raster voltage and high
sound.
The unit constantly on standby is (STAND-BY).

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com