cap site
   
 

SONY

RM-870.
SERVIS operates in this way: Press "1" and "4" elect
adjustable parameters, "3" and "6" -
decrease or increase the values, MUTE - recording, "0" -
execution record.
To exit press on the POWER button twice.
Another method of entering the service menu is associated with a synchronous
connection
TV. For this synchronous pressure on any two buttons on
front panel of the TV:
KV-S34JN1 / MN1 / SN1, KV-E2551A / B / E / K, KV-S29JN1 / MN1 / SN1 - on
CHASSIS AE-2B with remote control RM-831;
KR-S4613 - on CHASSIS AP-2 and RM-832 remote control.
3
A variation of this method, you can call the entry mode when
connecting
synchronous machine by press keys "-" and "+" on the
front of the TV:
KV-S2952KR - on CHASSIS AE-3 to RM-831 remote control.
There is also a kind of method, as used when energized
apparatus. first
need to press twice on the remote ON. In the
top right
corner of the screen there inscription TT. Then push the button on the remote
MENU in the TV:
KV-S2942U, KV-S2941A / B / D / K, KVS2943E - on CHASSIS AE-2F with
RM-831pultom.
ZAO "Center" Orbit Service "-15 technological trade center. Moscow,
Altufevskoe highway


* * *

SONY BE-3B CHASSIS KV-24WS1A / B / D / E / K / R / U

.
CXP85340A-116Q / 117Q
RM-837. Set the standby unit. Then you need to press the remote control buttons in the sequence ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.

Sony 6

* * *

SONY CHASSIS BE-3C

KV-C2503 B / E, KV-C2508 D / E,
KV-2501 A / D / K, KV-C2509 B / D / E / K.
Determine to standby unit, and push the button on the remote control in the following sequence: ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
Applies remote RM-833 model.

Sony 7

* * *

SONY G1 CHASSIS KV-S29 RN1 \ 34RN1

: Entering service implemented using the RM-821pulta. Plug the device into standby mode.
Then push a combination of buttons on the remote the following: DISPLAY -> 5 -> VOL + -> POWER

TAGS:

 
Tags | Site map | Copyrights
Copyright В© 2012 service-mode.com